• PS1 & PS2 Wireless UnoRetro Adaptor

THE £999 PRICE IS JUST THERE AS A PLACE HOLDER

THE CORRECT PRICE OF £30 WILL BE CORRECTED WHEN STOCK IS AVAILABLE :)


The PSUnoRetro Adaptor is a small dongle that lets you connect a wide variety of Bluetooth enabled controllers.

It is compatible with both Playstation 1 and Playstation 2 Consoles

You can use PS3, PS4, PS5, Xbox One, Xbox Series X/S, Wii, WiiU Pro, Switch Pro, Switch Joycon and 8bitdo controllers.

Simply insert the adaptor to a free controller port, pair your controller and get playing!

Many Thanks to darthcloud for developing the BlueRetro platform :).
See the BlueRetro Github - View Hackaday Article


How To Use Basics

UnoRetro Helper Windows Tool Download - V1.4

This tool is useful for viewing adaptor logs, updating firmware manually and pairing PS3 controllers.

For viewing adaptor logs and updating firmware manually, you are required to buy a CP2102 USB to TTL adaptor (Black Colour PCB!), you can find these on AliExpress and eBay for very cheap. fgfggf



Reset PSUnoRetro - 1st Button (R Button):
Press button once to reset the PSUnoRetro Adaptor.

Pairing Controllers - 2nd Button (P Button):
Short Press (outside BT inquiry mode): Disconnect all Bluetooth devices from the adaptor.
Short Press (BT inquiry mode): Cancel Bluetooth inquiry mode (new pairing).
3 Second Press: Enable Bluetooth inquiry mode (new pairing).
10 Second Press: Factory reset PSUnoRetro to default configuration and clear BT pairing keys.

Status LED:
Solid: An error occured, try power cycle, check serial logs for detail.
Pulsing: Bluetooth inquiry mode enable (new pairing).
Off: No error and Bluetooth inquiry mode disabled.

Button Mappings:
Click To View Spreadsheet

Latency Results:
PS4/PS5: ~5.4 ms
XBOX One: ~8.8 ms
Switch Pro: ~12.4 ms
PS3: ~12.8
WiiU Pro: ~13.2 ms
8bitdo: ~16.2 ms
Wiimote: ~16.3 ms

Updating Firmware (Windows/Android) (Google Chrome):
1. Go to https://blueretro.io/ and connect to your PSUnoRetro adaptor (make sure it's powered on and no controller connected).
2. Download the latest firmware release Here.
3. Select the file "BlueRetro_psx_ps2_spiffs.bin" then click Update Firmware button.
4. Via PC Chrome update should take around 5 minutes, with Android Chrome it will take around 45 minutes (!!!).

Changing Mappings & Multitap (Chrome):

1. Go to https://blueretro.io/ and connect to your PSUnoRetro adaptor (make sure it's powered on and no controller connected).

Multitap Config

** PS2 Multitap is not supported **

None: PSUnoRetro will emulate the device selected in output config #1 on PSX/PS2 port 1.
PSUnoRetro will emulate the device selected in output config #2 on PSX/PS2 port 2.

Slot 1: PSUnoRetro will emulate a PSX Multitap with 4 devices on port 1 as configured in output config #1-4.
PSUnoRetro will emulate the device selected in output config #5 on PSX/PS2 port 2.

Slot 2: PSUnoRetro will emulate the device selected in output config #1 on PSX/PS2 port 1.
PSUnoRetro will emulate a PSX Multitap with 4 devices on port 2 as configured in output config #2-5.

Dual: PSUnoRetro will emulate a PSX Multitap with 4 devices on port 1 & 2 (Total 8 devices) as configured in output config #1-8.
Alt: NA

Output Config

Mode

GamePad: PSUnoRetro will emulate a DualShock 2 controller.
GamePadAlt: PSUnoRetro will emulate a Flightstick (SCPH-1110 & Green LED mode).
Keyboard: PSUnoRetro will emulate a Lightspan Keyboard.
Mouse: PSUnoRetro will emulate a PSX Mouse. (Must use "Default Mouse" preset)

Accessories

Only valid for "Gamepad" mode.

None: PSUnoRetro will emulate a DualShock 2 controller with rumble disabled.
Memory: NA
Rumble: PSUnoRetro will emulate a DualShock 2 controller with rumble enable.
Both: NA

How To Pair Specific Controllers:

PS3 - Only Genuine PS3 Controllers Are Supported!


First Pairing:
1. Download and run the UnoRetro Helper Tool mentioned above.
2. Connect your PS3 controller to PC using USB cable.
3. Launch Sixaxis pair tool and type in the MAC Address found on the sticker underneath the PSUnoRetro Adaptor.

4. Click update, once done disconnect the controller from PC.
5. Insert the PSUnoRetro Adaptor and make sure it is in inquiry mode (LED Pulsing).

Reconnect:
1. Press the "PS" Button on controller and it will reconnect to the PSUnoRetro Adaptor.

PS4 & PS5

First Pairing:
1. Insert the PSUnoRetro Adaptor and make sure it is in inquiry mode (LED Pulsing).
2. Press & hold simultaneously Share & PS buttons until the LED blink white.
3. Color on controller will change once pairing is complete.

Reconnect:
1. Press the "PS" Button on controller and it will reconnect to the PSUnoRetro Adaptor.
Xbox One & Adaptive

First Pairing:
1. Insert the PSUnoRetro Adaptor and make sure it is in inquiry mode (LED Pulsing).
2. Power on controller via Xbox button and then hold the black sync button until the logo blink.
3. Logo will stop blinking on controller once pairing is complete.

Reconnect:
1. Press and Hold the "XBOX" Button for a short time on controller and it will reconnect to the PSUnoRetro Adaptor.

Wii & WiiU Pro

First Pairing:
1. Insert the PSUnoRetro Adaptor and make sure it is in inquiry mode (LED Pulsing).
2. Press Red Sync button.
3. LEDs will stop blinking on controller once pairing is complete.

Reconnect:
1. Press "Any Button" on controller and it will reconnect to the PSUnoRetro Adaptor.

Switch Pro & Joycon

First Pairing:
1. Insert the PSUnoRetro Adaptor and make sure it is in inquiry mode (LED Pulsing).
2. Press and hold sync button until LEDs move in a left/right pattern.
3. LEDs will stop pattern on controller once pairing is complete.

Reconnect:
1. Press "Any Button Twice" on controller and it will reconnect to the PSUnoRetro Adaptor.

8bitdo

First Pairing:
1. Insert the PSUnoRetro Adaptor and make sure it is in inquiry mode (LED Pulsing).
2. Power up 8bitdo controller in Xinput mode (Start + X).
3. Press and hold sync button until LEDs flash.
4. LEDs will stop pattern on controller once pairing is complete.

Reconnect:
1. Press "Start" on controller and it will reconnect to the PSUnoRetro Adaptor.

FAQ / Known Issues / Limitations


PS2 Console

Q. The analog controller (DualShock 2) is not detected, please insert analog controller.
A. Disable PADEMU in OPL.

ALL


Q. One motor doesn't work and speed is not the same as original controller.
A. Dual Motor and Speed Control are not yet implemented.

Q. Variable button pressure isn't working.
A. Button sensitivity is not yet implemented.

Write a review

Please login or register to review

PS1 & PS2 Wireless UnoRetro Adaptor

  • Product Code: PSUnoRetro
  • Availability: 357
  • £999.00


Available Options


Tags: playstation 1, ps1, playstation 2, ps2, wireless, unoretro, blueretro