• PC Engine / CoreGrafx EasyRGB Kit

With this simple and easy to install mod, you can get the best video output possible (RGB) from your console.

Included is a MiniDIN9 Conection PCB so you can use a MiniDin9 Socket with a MegaDrive 2 style cable.

This version is compatible with all "The Original PCEngine (White) and the CoreFrafx 1 & 2" models.


You are required to purchase seperately a MiniDin9 Socket if you require it.


Installation Instructions

Step 1: Console Dissasembly
1. Remove the 4 GameBit screws from the bottom of the console.

Step 2: Preparing / Installing Kit
1. Snap off the MiniDIN9 Conection PCB from the Main RGB Board.

2. Place the Main RGB Board over the EXT PORT Pins.

3. Solder the points in RED making sure everything makes good contact.

4. (Usual Case) If your RGB Cable HAS 75 ohm Resistors & 220uF Capacitors on the RGB lines, Solder the jumpers marked in BLUE.

5. If your RGB Cable DOESN'T HAVE 75 ohm Resistors & 220uF Capacitors on the RGB lines, Solder the jumpers marked in GREEN.

6. If you would like to enable the Low Pass Filter, Solder the jumper marked in ORANGE.

7. You can also use the solder pads marked in YELLOW (Red, Green, Blue & SYNC) if you'd like to connect the RGB output another way, I.E. DIN9 Socket.


2. Desolder and remove the original RF Box and install the MiniDin9 socket, making sure to align it with the case cutout.


3. Solder the MiniDIN9 Conection PCB to the MiniDin9 Socket.


4. Connect the included ribbon cable from the Main RGB Board to the MiniDIN9 Conection PCB with the blue tabs facing upwards.


5. If you have double checked your installation and are not getting any video output, join the 2 pins "S" and "CV" together with a blob of solder on the MiniDIN9 Conection PCB just incase your cable has Sync on another pin.

6. Test before re-assembly.

Write a review

Please login or register to review

PC Engine / CoreGrafx EasyRGB Kit

  • Product Code: PC Engine / CoreGrafx EasyRGB Kit
  • Reward Points: 25
  • Availability: 51
  • £25.00

  • Price in reward points: 250

Related Products

PC Engine RegionX Board

PC Engine RegionX Board

This small little board makes your PC Engine / TurboGrafx completely region free at a flip of a swit..

£16.00

PC Engine GT & NEC TurboExpress Silicone Buttons

PC Engine GT & NEC TurboExpress Silicone Buttons

These are a replacement set of silicone buttons for the PC Engine GT & NEC TurboExpress. These ..

£10.00

PC Engine / CoreGrafx RibbonFixer Kit

PC Engine / CoreGrafx RibbonFixer Kit

The Original PC Engine (White) and the CoreFrafx 1 & 2 are awesome consoles, but they have one..

£22.00

PC Engine / CoreGrafx IGR In-Game-Reset Kit

PC Engine / CoreGrafx IGR In-Game-Reset Kit

With this simple mod, you can reset your console with your controller using a button combination.Thi..

£25.00

PC Engine, CoreGrafx, TurboGrafx & Sega SG-1000ii Universal RGB Kit

PC Engine, CoreGrafx, TurboGrafx & Sega SG-1000ii Universal RGB Kit

With this simple and easy to install mod, you can get the best video output possible (RGB) from your..

£20.00

Tags: pcengine, pc engine, coregrafx, rgb