• PS1/PS2 PSUnoRetro BlueRetro Adaptor

THE £999 PRICE IS JUST THERE AS A PLACE HOLDER

THE CORRECT PRICE OF £25 WILL BE CORRECTED WHEN STOCK IS AVAILABLE :)

The PSUnoRetro Adaptor lets you connect a wide variety of Bluetooth enabled controllers to your PS1/PS2 console using the BlueRetro platform.

It is compatible with both Playstation 1 and Playstation 2 Consoles

You can use PS3, PS4, PS5, Xbox One, Xbox Series X/S, Wii, WiiU Pro, Switch Pro, Switch Joycon and 8bitdo controllers.

Simply insert the adaptor to a free controller port, pair your controller and get playing!

Many Thanks to darthcloud for developing the BlueRetro platform :).
See the BlueRetro Github - View Hackaday Article

Please Note: There is an issue within a very very very small handful of PU-18 motherboards that make random controller presses when using the BlueRetro platform. This happens because of design flaws within the motherboard. We have taken every step in this product to make sure that this doesn't happen, but it may still occur.


How To Use Basics

UnoRetro Helper Windows Tool Download - V2.2
(Includes V1.9.1 BlueRetro Firmware for HW1 and HW2)

This tool is useful for viewing adaptor logs, updating firmware manually and pairing PS3 controllers.

For viewing adaptor logs and updating firmware manually, you are required to buy a CP2102 USB to TTL adaptor (Black Colour PCB!), you can find these on AliExpress and eBay for very cheap.



Reset PSUnoRetro - 1st Button (R Button):
Press button once to reset the PSUnoRetro Adaptor.

Pairing Controllers - 2nd Button (P Button):
Short Press (outside BT inquiry mode): Disconnect all Bluetooth devices from the adaptor.
Short Press (BT inquiry mode): Cancel Bluetooth inquiry mode (new pairing).
3 Second Press: Enable Bluetooth inquiry mode (new pairing).
10 Second Press: Factory reset PSUnoRetro to default configuration and clear BT pairing keys.

Status LED:
Solid: An error occured, try power cycle, check serial logs for detail.
Pulsing: Bluetooth inquiry mode enable (new pairing).
Off: No error and Bluetooth inquiry mode disabled.

Button Mappings:
Click To View Spreadsheet

Latency Results:
PS4/PS5: ~5.4 ms
XBOX One: ~8.8 ms
Switch Pro: ~12.4 ms
PS3: ~12.8
WiiU Pro: ~13.2 ms
8bitdo: ~16.2 ms
Wiimote: ~16.3 ms


Changing Mappings & Multitap (Chrome):

1. Go to https://blueretro.io/ and connect to your PSUnoRetro Adaptor (make sure it's powered on and no controller connected).

Multitap Config

** PS2 Multitap is not supported **

None: PSUnoRetro will emulate the device selected in output config #1 on PS1/PS2 port 1.
PSUnoRetro will emulate the device selected in output config #2 on PS1/PS2 port 2.

Slot 1: PSUnoRetro will emulate a PSX Multitap with 4 devices on port 1 as configured in output config #1-4.
PSUnoRetro will emulate the device selected in output config #5 on PS1/PS2 port 2.

Slot 2: PSUnoRetro will emulate the device selected in output config #1 on PS1/PS2 port 1.
PSUnoRetro will emulate a PSX Multitap with 4 devices on port 2 as configured in output config #2-5.

Dual: PSUnoRetro will emulate a PS1 Multitap with 4 devices on port 1 & 2 (Total 8 devices) as configured in output config #1-8.
Alt: NA
Output Config

Mode

GamePad: PSUnoRetro will emulate a DualShock 2 controller.
GamePadAlt: PSUnoRetrowill emulate a Flightstick (SCPH-1110 & Green LED mode).
Keyboard: PSUnoRetro will emulate a Lightspan Keyboard.
Mouse: PSUnoRetro will emulate a PS1 Mouse. (Must use "Default Mouse" preset)

Accessories

Only valid for "Gamepad" mode.

None: PSUnoRetro will emulate a DualShock 2 controller with rumble disabled.
Memory: NA
Rumble: PSUnoRetro will emulate a DualShock 2 controller with rumble enable.
Both: NA

How To Pair Specific Controllers:

Please see the GitHub page here for a comprehensive guide on how to pair controllers:

https://github.com/darthcloud/BlueRetro/wiki/Controller-pairing-guide


FAQ / Known Issues / Limitations

Q. One motor doesn't work and speed is not the same as original controller.
A. Dual Motor and Speed Control are not yet implemented.

Q. Variable button pressure isn't working.
A. Button sensitivity is not yet implemented.

Write a review

Please login or register to review

PS1/PS2 PSUnoRetro BlueRetro Adaptor

  • Product Code: PSUnoRetro Adaptor
  • Reward Points: 25
  • Availability: 400
  • £999.00

  • Price in reward points: 250

Available Options


Related Products

Project Medusa - PS1 Internal BlueRetro Kit

Project Medusa - PS1 Internal BlueRetro Kit

The Medusa Kit lets you connect a wide variety of Bluetooth enabled controllers to your PS1 console ..

£40.00

Tags: playstation 1, ps1, playstation 2, ps2, wireless, unoretro, blueretro